Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
Our How-to-repair stores
Beko WM5100W & WM5100S test mode and error codes
Important notice on Beko WM5100S WM5100WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the
Beko washing machine wmb 7, 8, 9 Series diagnostic & test mode
Important notice on Beko Before entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum is empty
Beko washing machine not filling with water Error code E08
Diagnosing the Beko washing machine error
Beko WM5101W Washing Machine Test Mode & Error Codes
Important notice on Beko WM5101WBefore entering test mode please be aware that you are not meant to leave the machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum is empty
How to replace and test Beko washing machine element and Ntc sensor
Beko made washing machines elements and NTC sensors are quite easy to fit and on a lot of models the control board will tell you when something is wrong.
Beko WM5100W washing machine Won’t spin – test mode 4
hi, I’ve removed a penny from the pump. Put back together. Machine still makes a large hum noise and will not begin cycle.
I have went through test mode and spins both anti clockwise and clockwise and then nothing. Start/pause led and extra rinse led both flashing and nothing happens. Any help appreciated
Beko WM5100W washing machine Will not run although start/pause button LED is illuminated
Will not enter Diagnostic/test mode.Start/pause LED permanently on. This occurred after a power cut
BEKO WM5100W washing machine will not spin
Hi Domingos I would check under the motor faults first, see videos below. I have also included some useful links here To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about these Beko´s.
beko wtv7531x0 not spinning
beko wtv7531x0 not spinning To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about these Beko´s. Please have a look at the relevant video to your problem, and if you need
Beko WMA5105 washing machine Machine is jumping around
Hi PiarasI would check for movement in the bearings on the drum also if the machine is not emptying in correct amount of time this can cause the machine to shake, see videos below. I have also included some useful links hereif you need spares for this model you will need model and serial number