Refine your search
You can refine your search further by entering make and model number if you are looking for parts. If you are looking for tutorials please use appliance type only. If you need help please use FAQs or ask a question in contact us page (make sure you have full model number)
Having trouble with layered Navigation? Watch Video
Our How-to-repair stores
Beko washing machine wmb 7, 8, 9 Series diagnostic & test mode
Important notice on Beko Before entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum is empty
Beko washing machine not filling with water Error code E08
Diagnosing the Beko washing machine error
Beko washing machine self test & diagnostic mode
When looking at the dial on a Beko washing machine treat it as a clock 1 to 12 as in picture. On some models you may have more programs but for the basic access into the diagnostic mode is the same the same Start by turning the washing machine of with door shut.Now turn the
Beko WM5101W Washing Machine Test Mode & Error Codes
Important notice on Beko WM5101WBefore entering test mode please be aware that you are not meant to leave the machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum is empty
How to replace and test Beko washing machine element and Ntc sensor
Beko made washing machines elements and NTC sensors are quite easy to fit and on a lot of models the control board will tell you when something is wrong.
Beko WMA5105 washing machine Machine is jumping around
Hi PiarasI would check for movement in the bearings on the drum also if the machine is not emptying in correct amount of time this can cause the machine to shake, see videos below. I have also included some useful links hereif you need spares for this model you will need model and serial number
BEKO Condenser Sensor Drier Model DHR 73431 water pouring from the condenser
Hi Colin if water is pouring from the condenser then you may have a problem with the pump system and it’s not able to pump the water to the collection tray I would strip down the pump assembly and checking for blockages
Beko DRCS68W tumble dryer not heating
Hi Joseph Double check the heating element, and also check again the front stat if the pcb is not getting the right reading it will not heat up. when you have checked that the wiring is good and ntc and heater then it might be a fault with the pcb
Beko wm7355S wont spin
Hi Heidi I would check for motor faults first the carbon brushes on your Beko WM7355S they could need changing, see videos below. I have also included some useful links here To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There
Beko wm5100 washing machine that will not spin
Hi lisa I would check the motor faults first, see videos below. I have also included some useful links here To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about these Beko´s. Please