Search page - How to Repair

  If your washing machine’s drum won’t turn during a wash cycle, the problem is usually a worn or snapped belt or a problem with motor or pcb see other repair guide videos.

  To find your Belt for your Washing Machine you will need the full model number and on some models we will even need the serial number as the manufactures sometimes have fitted more than one type to a model series.

 Important notice on Beko Before entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum is empty

This video will show you how to identify your 3e error code fault and replace the motor or carbon brushes 3E error code is a Motor tacho fault detected Can also be caused by be main PCB   If the motor tacho signals are inputted less than 2 for 2 seconds after main drive motor

 To order your carbon brushes for your washing machine, you will need the full model number of the ID Plate, which you can normally find on the inside of the door frame or in the rear of the machine. Sometimes you will need the 12 digit number, which is usually prefixed with 12NC in front of