Whirlpool tumble dryer 6th sense error code how to clear
If your whirlpool tumble dryer has stopped working and you have an error code which is usually due to some type of fault then this short video will show you how to clear the fault it can also be used on these makes Bauknecht, Laden & Maytag on some models.
31 Responses to “Whirlpool tumble dryer 6th sense error code how to clear”
My tumble dryer has stopped working when i turn it on all the lights come on ive cleaned it all out and still nothing any help would be appreciated thsnks
hi donna i need a lot more info make and model and is the machine doing anything?
help needed please red light fault cleared but keeps returning after 30 seconds of running new belt and condenser cleaned
mod is axb9750 whirlpool
Hi! Do you know what faulty cod f07 means?
i need to know make and model please
whirlpool AZB 7670
Hello Paul, we do face this issue too, we have a whirlpool dryer 6th sense azb7670, error code F04 appears, we do run through your procedure, then, it disappear but comes back upon restarting the dryer machine, any help please?
Thanks you very much.
br
sam
my Whirlpool tumble dryer 6th sense the same one you use in your videos makes a burnt smell when turning it on also it had all sign light on but i cleared that error using your video but the smell is still there, any ideas?
hello, my Whirlpool Luna A/6 has stopped working in the middle of a cycle, no lights are blinking no lights are on, the filter is clean.
ive tried the reset you showed in the video clip but it didnt work, i tried unplugging and replugging stil nothing. its like there is no power going true but the electricity is ok. i have opened up the back to look for a fuse but i canot find any.
thanks
Hi Chris.
I have the same problem.
Did you find a solution or reason from anyone that may help me out?
Regards
Hans
My tumble dryer has been sitting in my kitchen unused for months. Your video resolved the issue. Thank you. No more hanging on radiators.
Hi, my phillips whirlpool aza 9790 6th sense aircare tumble dryer wont start ….. have tried everything we can think off . All t he lights are on so it’s got power, it just wont start ! Any ideas please ??? ……. thanks in anticipation x
Hy
Deborah, could you solve your problem?
I have same diagnose on my whirpool azb 6370 ?
Everthing seem OK, but when I press start have tho short beeps and nothing hapen?
Could anyone sugest what to to, PLEASE?
Tnx, Robi
Many thanks for the info! After several tries we were able to clear the error code. Incidentally, my model (AZB 8680) was one of the ones where you do have to press the start button 4 times. 🙂
Hi i have a whirlpool 6th sense dryer. Model number azb 9788. Have error code f06 showing which have been told is a pcb fault. Could you tell me if this is correct. Also on the motor where it has the 2 spinning fans at either end the larger of the 2 wobbles and makes a noise. Is it possible to order these 2 parts, if it is the pcb also. And also how do i order and what is the cost. Many thanks and great tutorials.
check carbon brushes first
Appliances Engineer
I have the same error code f 06 and the heating element was broken.
Thankyou, fantastic, had to do it more than once, 5 times I think, but it worked. Gus
I cleared the error on my 6570 but it comes back again after 30 seconds. I have cleaned filters and water tank. What more can I do?
Hello I have a whirlpool 6th sense dryer , AZB7670 and the f07 fail code has come up. I cleared it like you showed but it comes back. I need help to find out what to test or replace. Thanks
how do i clear code erroe f04 on a tumble dryer model AZB8680
Good day,
I am trying to reset my Whirpool dryer
AZA-HP 9781
8575 978 26020
the filter light is blinking doesn’t recognize
that the external filter is in
Any Ideas ?
Thank u
Hello i have a 6th sense azb9030. Error code f06 can you help?
Check heating element or ntc sensor.
I have a Whirlpool 6th sense 7kg AZB 7780. I keep getting a small red rectangle with a water drop on screen. I have cleaned lint and coils…also emptied water. After 2or 3 minutes it gives me dance message. What should I do?
Hi I have a model AZB8680 displaying error f 04. I have followed instructions and cannot clear code for more than a few seconds 😢
Hello – I have a Whirlpool AZB8680. No errors. No warning lights. Water container is empty. Condenser is clean. Lint filter is empty.
Machine starts, then stop after a short time.
Help! It’s 4 years old, but not used much, so like new really.