how do I remove the door from a Neff W5420X1GB washing machine. I have removed the 2 torx screws, does the door just pull off?

ONLY NOISY AT FULL SPEED SPIN my model no is WF865A 35130877 1600 SPIN

Hi – the soap tray is dripping when the machine is used and the conditioner doesn’t drain. I watched your video and it appears the siphon fitting that sits on top of the certical tube seems to be missing (we have moved house recently which may be why). Please could you let me know if you sell a generic fitting that would fit? PS thank you for the excellent videos.

Not filling. Water going in and coming straight out

IS THERE ONLINE VIDEO FOR ZANUSSI WASHING MACHINES

I have replaced the ​haul sensor on my washing machine after watching one of the videos​, but the motor will still not turn. the drum is very stiff and when the machine fills with water it tries to turn but stops, after having a conversation with you on the phone, I have had great trouble removing the element but after finding out that there was an additional nut holding the earth wire on the element. I eventually managed to get it out and lo and behold found this sock wrapped around it

When on a wash cycle, excessive noise washing its Noisy from pump area when on wash cycle, can you help

Hi, I did a load of towels in my beko machine and put too much soap. I now have an e12 error. Can you help me

Good afternoon
be4 start wash when i close the door the sign key appear on screen board and i can’t open again when i press start button and washing machine start pumping out even without water and drum moving slowly NO water coming and timer work normally and when switch off the door not open.
Thanks

Brushes for C.E.SET Motor MCC 61/64-148/WHE14 461970428301