FORGOT YOUR DETAILS?

AAH, WAIT, I REMEMBER NOW!

beko oven BDVC664K not heating element faulty

by / Tuesday, 29 May 2018 / Published in

my oven will not heat it is not heating the fan is turning and the light is on, the thermostat light also comes on. but there is no heat can you give me the correct fan oven element, please

Paul answers

I will try and help with this problem Beko BDVC664K  cooker

If your oven is not Heating then there is a good chance that the fan oven element may have blown. I have included some videos below to assist you with testing and replacing the fan of an element on your cooker.
I have listed all the major parts below that are to do with the heating circuit.

For your future reference, I’ve included some Common faults with these BEKO BDVC664K  Oven cookers to assist you in the future or anyone else reading this.

  • The oven will not turn on
    The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.
  • No Heat in Oven
    If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
  • Electricity trips (Rcd) when I turn the oven on or grill
    This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
  • The grill element doesn't work
    This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
  • The oven fan is not working or spinning correctly (slow) or is noisy
    The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
  • The oven overheats and burns everything
    Normally this is a simple thermostat failure which would manifest itself as this symptom.
  • The oven or cooker cuts out after it's been on for a while
    This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.

 

bdvc664k wiring diagram oven

bdvc664k

bdvc664k wiring diagram hob

bdvc664k 3

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

Full list of spare parts for Beko BDVC664K

Our How-to-repair stores

Current page 1 Total pages 0

2 Responses to “beko oven BDVC664K not heating element faulty”

  1. s ball says : Reply
    November 8, 2022 at 3:13 pm

    beko bdvc664k top oven/grill not working a new element has been fitted.
    not sure if there are internal fuses or other protection that could have operated as not been able to find a decent wiring diagram

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP