Candy Grand Tumble dryer gcc590nb-80 All lights flashing

by / Wednesday, 17 May 2017 / Published in

The model is a Candy Grand -GCC - 590NB -80 S/N 311006361450141 turns on for a minute - no heat - then all lights flash (just like in your video). If this is an error for a specific part and is generally easy to replace, then I'm happy to do that if you could give me the cost of the part. Thanks

Lee

Paul answers

I will try and help with this problem your Candy Grand Tumble dryer gcc590nb-80

This may be a problem with the heating system​ there are a few separate components which might need checking, the first thing I would check is the heating element there are two sides to the heating element a high and low circuit​, there are also a couple of thermostats fitted on top of the heating unit which may have gone faulty you need to check these as well, there is also a thermostat usually at the front of the machine on either the vent tube or the casing this will also need checking plus an NTC sensor is fitted on some if these all seem to be good then you may have a fault with a circuit board and this is normally a relay. I have included all the videos you need to assist you with your repair below

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

List of spare parts for candy gcc590nb-80 tumble dryer

Our How-to-repair stores

Current page 1 Total pages 0

3 Responses to “Candy Grand Tumble dryer gcc590nb-80 All lights flashing”

  1. Julie says : Reply

    Hi i have an issue with dryer , after pressing start the light is flashing which is normally solid an its going straight into pause mode , any ideas please ?

  2. Mark says : Reply

    Hi
    My candy grand GCC 591NB tumble dryer has all the lights flashing on it and it doesn’t seem to be drying the cloths ( cool air )
    Can you help please

    Thanks

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP