NEW REPAIR GUIDES

FORGOT YOUR DETAILS?

AAH, WAIT, I REMEMBER NOW!

Logik LFTC50W16 cooker, oven trips and stops cooking

by / Sunday, 06 September 2020 / Published in

Logik LFTC50W16 Electric Ceramic CookerI've had a problem were the oven trips the power in the house then I have to reset the cooker and start cooking again not all the time but it's getting annoying

Peter

Paul answers

I will try and help with this problem  Logik LFTC50W16 cooker oven

first, you need to find what is tripping the power supply, it sounds like one of the elements has gone to earth. you will need to find out which element is faulty. but I suspect it is the fan oven element if it always happening when you are using the oven, I have added some videos below to assist you. and a full list of parts below

For your future reference, I’ve included some Common faults with these Logik LFTC50W16 Oven cookers to assist you in the future or anyone else reading this.

  • The oven will not turn on
    The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.
  • No Heat in Oven
    If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
  • Electricity trips (Rcd) when I turn the oven on or grill
    This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
  • The grill element doesn't work
    This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
  • The oven fan is not working or spinning correctly (slow) or is noisy
    The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
  • The oven overheats and burns everything
    Normally this is a simple thermostat failure which would manifest itself as this symptom.
  • The oven or cooker cuts out after it's been on for a while
    This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.

 

 

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

 

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

Logik LFTC50W16 cooker oven full list of spare parts for this model below

Our How-to-repair stores

Current page 1 Total pages 0

  • Cooker Oven Grill Pan Tray Includes Handle & Grid : 365x290mm 20627919

    Category: Recycle Appliances

    £36.95

  • Main Oven Fan Motor 20796538

    Category: Recycle Appliances

    £41.95

  • Cooker Oven Lamp Unit / Light Bulb 230V 25W

    Category: Recycle Appliances

    £13.95

One Response to “Logik LFTC50W16 cooker, oven trips and stops cooking”

  1. Lianne says : Reply
    December 19, 2022 at 3:29 pm

    Hello, my new Logik LFTC50W16 cooker is leaking water out the bottom of the oven door when I use it. Currys sent an ‘Engineer’ round and he said that he couldn;t find a fault and that it was probably because it’s a cheap model. Surly this isn’t right?

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP