If your washing machine is leaking from the front of the door, or the door seal is torn, warped or damaged, or mold has built up at the bottom of the seal and it’s beyond cleaning, it´s time to replace it for a new one.This video will show you in detail how to replace the

      Important notice on Beko WM5100S WM5100WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the

How to find your fault on your washing machine.This short guide is designed to outline the most common problems on a washing machine, although many people that read this tutorial are looking for a quick way to find out how to repair a washing machine there are not really any shortcuts. What this guide is

We are always asked about customer’s washing machine not spinning, there are a few reasons this can happen and some are very simple fixes and I will list them below and then go in to more depth. Common washing machine faults that lead to the washing machine not spinning or not spinning properly. There could

This video will show you how to replace Haier washing machine motor carbon brushes with Indesco or Welling Motors, we are working on a Haier washing machine that was not spinning.To order your washing machine motor Carbon Brushes you will need your full model number (This is normally around the washing machine door frame on

Your Teka washing machine will not spin or fills with water but does not wash is a common fault and could be that the carbon brushes have worn out in the motor. To order your washing machine motor Carbon Brushes you will need your full model number (This is normally around the washing machine door

This video will show you how to replace washing machine motor carbon brushes in a Indesco & welling motors, we are working on a Teka washing machine but this guide is good for most makes that have Indesco or welling motor fitted like: Indesit, Haier, Teka, Samsung.To order your washing machine motor Carbon Brushes you

   How to replace a mouldy washing machine door seal or one that just has a hole in it.This video is on Hotpoint washing machine and can be used on Indesit, Ariston & Scholtes models.To order your door seal you will need your full model number. (This is normally around the washing machine door frame on

 This video will show you how to replace washing machine drum bearings to Bosch, Neff, Siemens or Balay washing machines.To order your washing machine drum bearings you will need your full model number. (This is normally around the washing machine door frame on a sticker) Of all repairs that can be done to Bosch, Neff, Siemens

  If your washing machine’s drum won’t turn during a wash cycle, the problem is usually a worn or snapped belt or a problem with motor or pcb see other repair guide videos.