NEW REPAIR GUIDES

FORGOT YOUR DETAILS?

You can now ORDER wide range of new and second hand spare parts for your household.

Noisey Tumble dryers, Rear drum bearing on , Candy, Hoover, Iberna, Kelvinator, tumble dryers

by / Sunday, 28 January 2018 / Published in Drum & Bearings, Tumble Dryers

How to replace a rear drum bearing on Candy, Hoover, Iberna, Kelvinator, tumble dryers

Hoover and Candy tumble dryers are notoriously hard to work on, especially if you don't know how they are put together and don't have anybody to help you out and give you a few hints. 

This video is on a tumble dryer that is noisy. this video will show you how to replace the rear bearing it can be used on any vented or condenser tumble dryer made by Candy, Hoover, Iberna, Kelvinator.
we will show you how to strip down the machine. while you're doing the work on how to replace the rear bearing while inspecting the forward drum support Wheels and the Motor jockey Wheels

While you are at it do take the opportunity to clear all the fluff you can, as it improves the useful lifespan of your Candy, Hoover, Iberna, Kelvinator, tumble dryers.

Before you start any investigation of the fault or even remove the lid of your tumble dryer please watch our videos and fully understand them in full and pay particular attention to the safety and information notices

Please remember to support our site by buying spare parts from our store and, if you decide we really helped you can always share the site with friends.

There are loads of video below to help you repair your tumble dryer condenser or vented and they will help you with all these makesCandy, Hoover, Iberna, Kelvinator, tumble dryers models.

 

New bearing

Worn drum bearing

Check the old belt size this in a 1930 mm belt also clean all fluff

Check jockey whells and also clean all fluff out

Fit new belt around the pulley wheels

Fit belt around the pulley wheels

Fit new belt around the drum

Fit  belt around the drum

Replace front carefully after replacing belt

Replace front carefully after replacing bearing




TOP