Samsung WD90J6410AW EcoBubble Washing Machine Keeps Showing HOT ERROR
Samsung WD90J6410AW EcoBubble washing machine keeps showing HOT ERROR IT APPEARS even when using only wash cycle without drying the clothes it stays for hours before I can open the door.
Tehmoor
I will try and help with this problem about Samsung WD90J6410AW EcoBubble Washing Machine
Hi, it's quite tricky for me to figure out the issue without having the machine right here. On samsung washer dryers, there are a few NTC sensors and thermostats. One of these might be faulty or there could be a short in the wiring. Without seeing the machine, it's nearly impossible for me to know for sure.
It's worth trying to run a diagnostic test sequence. I've added some below, but they're for regular washing machines. I'm not sure if these will work on your washer dryer. You'll need your full model number to find a way to enter diagnostic mode, as this could point you towards the error by giving you a fault code. Without this info, I can't help much more.
I apologise for not being able to provide more details, but I don't have the workshop manual for this model. Good luck fixing your washer! I've also added some helpful videos below for further assistance.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
-
How to enter test mode or diagnostic mode on Samsung washing machine
-
Samsung Washing Machine Fault Codes & Washer Dryer Models
-
How to run the calibration mode on Samsung washing machine
-
How a NTC Sensor works on a washing machine
-
Dismantling Samsung washing machine WD0804W8E1/XEU fault finding, and how components work
-
How to replace & fit a Samsung washing machine door seal gasket