Bosch classixx 6 WAE28363GB has stopped
hi. bosch classixx 6 WAE28363GB has stopped with 45 mins left of a 1hr 35 min cycle. The wash symbol is still showing. There have been some grinding noises intermittently over the last month but was not in when it has stopped so dont knowwhat happened. Any obvious things to check? it is approx 7 years old. economical to repair? I normally try to fix things myself if possible. Any advice, gratefully received. Thanks.
James
Hi James
first the grinding noise could be the bearings or something stuck in the drum you need to check this see videos below. 2nd the machine could stick in cycle for a few reasons water valve not working, not pumping out, heater may have gone open circuit or the pcb may have failed you need to check these. also check lock is working
-
How to change and replace a washing machine pump on Bosch, Neff and Siemens.
-
How to Check to see if your Washing machine bearings are worn.
-
How to fit the new element and thermostat to this Bosch, Neff or Siemens washing machine.
-
How to replace washing machine drum bearings on Bosch, Neff, Siemens or Balay.
-
Bosch washing machine will not spin
-
Washing machine will not fill with water.
-
How a washing machine door lock or interlock works
-
How a NTC Sensor works on a washing machine