Beko Washing Machine Door Handle & Hinge Catch: how to replace
In this video, I'll be showing you how to change a door hinge and door catch handle on a Beko washing machine. It can be used on a lot of brands listed below.
Beko wm washing machine door hinge and handle catch external type
Beko wmb washing machine door handle & hinge catch internal type
>
If your door hinge is broken or door handle is loose and you can't open the door it's likely the door handle is broken and it needs replacing. The most common part the door handle to break is the in a plastic molding, and this is usually due to excessive force being used to open the door when the door is locked shut.
Aftron, Ahma, Akai, Alien, Alpari, Altus, Andi, Ansonic, Arcelik, Arctic, Armani, Atlas, Axxon, Aya, Beko, Beta, Blomberg, Bluematic, Bluesky, Carad, Carrefour Home, Cellini, Codini, Connect, Crown, Defy, Delton, Donar, Elba, Electric Co, Elektra Bregenz, Elettrozeta, Elin, Eskimo, Euro, Euroline, Europa, Eurosky, Faber, Fagor, Federal, Fensa, Ferette, Fisher & Paykel, Flavel, Fortress, Fricon, Funix, Goldi, Grundig, Hajdu, Helkama, Houseline, Hyundai, IFB, Koncar, Lamo, Lamona, Magic, Majestic, Mercury, Mirage, Modena, Moritz, Nikkei, Nojintech, Nordfrost, Novox, Okean, Orion, Pacific, Pars, Peabody, Penguin, Perfect, Perfekt, Philco, Privileg, Prolux, Rainford, Reeson, Rotel, Saba, Saivod, San Giorgio, Sang, Sanyo, Siera, Sunny, Superfrost, TechnoStar, Technolux, Tecnokit, Tensai, Thor, Tophouse, Universal, Valenti, Venus, Vico, Victor, Victory, Wasco, Weltec, White-Westinghouse, Winson and Winstar.
Safety first, always unplug an appliance before carrying out any work.
the first thing you will need to do is to peel back the door seal to give you access to the rear of the door hinge there is a retaining plate which you need to keep hold of while you are undoing the screws this will stop it falling inside.
Once you have removed the door you need to place it on a flat surface covered with a tea towel this will stop scratches appearing on the door frame,
The next thing you will need to do is remove all the screws around the Frame, then using a thin screwdriver flat blade prize the two halves of the door apart.
This will now give you access to the door hinge, and also the door handle, the door hinge is pretty self-explanatory and can easily be replaced.
the door handle and catch will need to have the pin slid out so this will come apart, it is very important to this point to make sure you have some good photographs of the way washing machine door handle was assembled, Slide the pin out replace the door handle and reassemble the machine in the Reverse process
-
Beko washing machine not starting how to replace the door lock interlock
-
How a washing machine door lock or interlock works
-
Beko washing machine wmb 7, 8, 9 Series diagnostic & test mode
-
Beko washing machine not filling with water Error code E08
-
Beko washing machine self test & diagnostic mode
-
How to replace and test Beko washing machine element and Ntc sensor
-
How to Unblock or Replace Beko Washing Machine Pump
Hello, I need advice on how to dismantle the door in the washing machine and get to the door handle I will only add the inside of the door do not have any screws or screws? are there any latches? I need to replace the door handle but I do not know how to get in. I will be grateful advice.
BEKO WX842430W
did you get a reply got the same trouble
How do you open the door as my handle has broke and the door is closed
I need a replacement door handle for a Beko WM 74155 L W
How do we open door when handle is broken?
i have a beko wx842430w washing machine the handle is broken how do i get to take it apart as there doesnt seem to be any screws
Hi, any tips on getting replacement handle to latch. I have it the pin backwards and handle down as described, however the pin seems to fall forward when I put the door cover on?
Thanks!
Our Beko WMI71641 stopped working.
It gave an [E] error code which was replaced with the numbers 15 19. Number come up when the self diagnostic test is started. When I cycle through the tests, everything works apart from the drum movement ones.
Please can you help?
My door is locked, but the handle that you squeeze is broken. How do I get the door to unlock how to fix it? Beko number is WMB -81241 Ls
I’ve replaced the handle exactly like in the video (which was very helpful thanks!). However, now it does not close properly nor does it lock when the machine is turned on.. How do I fix that?