LG FH4U2VCN4 Washing Machine Door lock mechanism
Just need the correct part for this washing machine please I have tried to look myself and cannot find it
- Published in
Hotpoint WMA10P washing machine Bearings failed
Following up one-to-one consultation request for 1pm today:
I put new bearings in a Hotpoint WMA machine a couple of months ago, but evidently the seal was not right and the bearings are failing due to the grease washing out of them. I wonder if you could have a chat / look to see if there is any obvious problem with the seal and / or my installation of it. Thanks.
- Published in
Bosch WAE24364GB/19 washing machine Very noisy on spin
- Published in
Siemens Wm12s494gb-23 washing machine, Very noisy on spinning
Sounds like aircraft taking off. Think I need new bearings. Will we be able to get to them on this model?
Thanks in advance of your reply.
- Published in
Lg Wt1101cw Washing Machine Showing 0e
Lg Wt1101cw Washing Machine Showing 0e I Replace Pump Check For Blockage Find No Blockage I Have Done Everything To Fix The Problem
- Published in
Servis Washing machine 6035 F4 fault carbon brushes
- Published in
Bosch E-Nr: WAN28080GB/01 Bearings need changing on my washing machine
Hi,
1. Do you have a “bearings + seal kit” available for this model and how much would it cost to send it to Redditch?
Other details:
Bosch Serie 4
Type: WLM68 WAN28080GB 416050295900002917
2. The other question is whether you buy washing machines at all? This one is only 3 year old ( no scratches, mould on the inner sealing etc). Apart from bearings it is absolutely fine and would be good for someone with experience on fixing them. All documentation including the purchase receipt is available.
Thanks in advance
- Published in
Beko WDR7543121 washing machine Won’t drain
My Beko Washer Dryer won’t drain? I’ve already Drained the machine and cleaned the filter thinking it would solve it but tried empty and it’s full of water and not draining again. Please help x
- Published in
Hotpoint AQ113D697E Aqualtis Washing Machine Dial Not Working
Stuck on one program and will not start Machine has been getting noisier lately. And now stuck in one mode on the program dial. I suspect to start with main bearing to be the noise and needs replacing Would the vibration have upset the ecu ?
- Published in
Bosch WFO2866GB/07 Washing Machine FD8409 603609 spin motor just does 1 revolution
- Published in