Candy gcc590nb-80 tumble dryer All lights flashing
Dryer spins for a few minutes then the dryer stops all lights flash and no water is in the collection bucket
Simon
I will try and help with this problem with your Candy gcc590nb-80 tumble dryer
As this tumble dryer has the collection Bowl at the bottom it does not have a pump system, so I suspect you have a fault with the heating system.
First, test the element on both sides to make sure you have a circuit, then you need to test the two thermostats on the top of the heater, there is usually a forward thermostat the front of the machine you will need to test this also, the Last thing you can check is that the collection Bowl make sure it is seating correctly in its socket. I have listed some of the videos below that will help you in repairing your tumble dry.
if everything else checks out well then you want to watch the video on heater relays as you may have a fault with the circuit board,
-
Tumble dryer not heating Hoover Candy diagnosing fault and repair
-
Hoover Candy Tumble dryer all lights flashing error fault code
-
How to service a Hoover Candy condenser tumble dryers
-
Tumble dryer printed circuit board heater relay faults
-
How to replace a tumble dryer belt Hoover or Candy
-
Hoover Candy Tumble dryer drum not turning and belt ok faulty capacitor
hi, i bought a capacitor of you to replace on my candy gcc 590nb-80 tumble dryer. i was advised there is a video to do the replacement. There seems be no video or any instructions for this model. any help asap please.
Regards
Hiya my candy tumble dry is about a year old.its starts a cycle but within a few minutes it stops and all the lights flash red