Candy Condenser Tumble Dryer CSC8DF humming noise not starting.
I have a humming noise in my tumble dryer is not starting can you help.
Fiona from Ipswich
I will try and help with your Candy Condenser Tumble Dryer CSC8DF problem.
If you'll tumble dryer is making a humming noise then there is a very good chance it could be the capacitor on the motor you will find this in the exploded diagram below. you might be able to get to a universal capacitor but you will need to find out the microfarad on the capacitor this will be followed with uf ?? I have also put some videos below to assist you in your repair and also a full exploded diagram of your Condenser Tumble Dryer CSC8DF with a full list of spare parts at the bottom.
please note there were two models of this machine so please use full model number when ordering parts.
S C8DF-80 31100921 1731 (02/08/2017) ALL MARKETS
CS C8DFZ-19 31100993 1752 (26/12/2017) 1918 (02/05/2019) ALL MARKETS
Â
Â
Â
Â
Â
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
Â
Â
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Â
Common Candy Condenser Tumble Dryer CSC8DF faults with links to the right repair guide
I have included a lot of videos in the links below on these tumble dryers to assist you in repairing your tumble dryer; I have also included an exploded diagram of your machine with all the parts that you need listed below that just click on the relevant and it will take you to a search result
- No heat
This is the most common fault on tumble dryers.
Vented dryers: this can be a fault with the thermostats, heater, or on some occasions, it might be the timer or the relay on the printed circuit board.
Condensor dryers: this might be any of the above but you also have a condenser plate that collects the water and then is either pumped to the collection tray or flows into a tank. Check pump unit and float switches.
Heat pump dryers: these are much more complicated they use a refrigeration prosses to heat the cloths and use the cooling side to condense the water for collection. Check compressor is running, check NTC sensors and check filters, and also that it has the right amount of refrigeration gas (normally only done by an engineer)
- Drum not turning
This will stop the dryer from drying. You may have to replace a faulty belt or in other cases, look at the motor, motor capacitor, or the jockey wheels. Again there are relays on printed circuit board types that can go faulty.
- Not starting
Whilst, not a common problem, you may have a faulty door switch, starter relay if fitted, or can be start button or PCB.
- Noisy Machine
This is usually caused by faulty bearings, jockey wheels or worn felt pads. The motor can get dust build up in the bearings, also the fan blades can distort in shape and make noise rubbing the housing.
- Water leaks.
This can be a simple as the water tank (in a condenser tumble dryer) has not been emptied, or not placed back into the housing correctly. The condenser plate can need cleaning. The pump unit might not be working. Or the ducting system can be clogged with fluff etc. See servicing tumble dryer.
- Tumble dryer reports a fault code or error code.
Error codes can be on the display or given in certain lights flashing sequences. Tumble dryer fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your ownerâs manual may help you identify the problem and even suggest a fix. In other cases, youâll need an engineer to trace the fault. Donât be tempted to ignore a fault code, even if the dryer seems to be functioning normally. Some codes are âearly warning signsâ and fixing the machine at an early stage could save you time and money in the long run.Contact us with the full model number and detailed descriptionÂ
CS C8DF-80 31100921 1731 Fault Error codes E03, E05, E07, E08, E10, E12, E13, E14, E15, E19, E21, E22.
-
Noisey Tumble dryers, Rear drum bearing on , Candy, Hoover, Iberna, Kelvinator, tumble dryers
-
Tumble dryer not heating Hoover Candy diagnosing fault and repair
-
How to replace a tumble dryer belt Hoover or Candy
-
Hoover Candy Tumble dryer drum not turning and belt ok faulty capacitor
-
Hoover Candy Tumble dryer all lights flashing error fault code
-
How to service a Hoover Candy condenser tumble dryers
-
Hoover Candy tumble dryer empty water Indicator flashing, runs for a few seconds then stops
full list of spare parts for Candy Condenser Tumble Dryer CSC8DF model below
Reference | Part Number | Description |
---|---|---|
10 | 43012769 | Timer/select. knob |
31b | 40011303 | Control panel with Sensor |
48 | 40010677 | R/H side frame |
48a | 40010678 | L/H side frame |
49 | 40004597 | Top rear frame |
51 | 40004601 | Work top |
60 | 40009145 | Hinge |
67 | 40009956 | Door with trim |
77 | 40004062 | Rear panel |
77 | 40012171 | Rear panel |
79 | 40002885 | Foot |
82 | 40010000 | Door panel |
88 | 40008589 | Front panel |
131a | 92470020 | Hose clip |
135 | 40004935 | Water valve |
136 | 40004933 | Water container valve |
152a | 40010223 | Light guide support |
156 | 41039164 | Capacitor 7 MF |
157 | 40011135 | Harness |
157 | 40012504 | Harness |
164 | 91200489 | Anti jamming filter radio |
171 | 40008460 | Main motor |
202 | 40009120 | Drum |
202 | 40011928 | Drum |
205 | 40006362 | Drum shaft assy |
218 | 03210179 | Bearing |
219 | 21446068 | Bolt |
229 | 24721202 | Circlip |
230 | 40004306 | Bearing clamp |
271 | 40005393 | Door gasket |
292 | 40001012 | Drive belt |
292 | 40012264 | Drive belt |
318b | 49039839 | Electronic control PCB - NFC -Programmed |
318c | 40010594 | Electronic NFC pcb - Not programmed |
442 | 40009278 | Fan |
442a | 40009379 | Rear fan |
443 | 40011108 | Thermostat |
443 | 41037151 | Thermostat |
444 | 40012558 | Duct fun |
445 | 40012556 | Nozzle Cond. Recovery |
445a | 40012557 | Nozzle Cond. Recovery Seal |
448 | 40005010 | Heater |
448 | 40013366 | Heater |
461h | 41014595 | NTC sensor seal |
491c | 91200201 | Mains cable x UK |
494d | 40010222 | Light Guide - Digital Display |
520 | 40006928 | Door coupler |
631 | 03730696 | Stopper |
647 | 40008382 | Water condenser |
654 | 40003802 | Thermostat gasket |
671 | 03610428 | Washer |
690 | 40006246 | Rear sealing felt |
690a | 40004577 | Rear cover seal |
690c | 40010756 | Seal motor/water duct |
696 | 40006820 | Heater support |
697 | 40003226 | Heater support disk |
706 | 40010766 | Front ring assembly |
706 | 40012495 | Front ring assembly |
707 | 40005584 | Filter for carter |
727 | 40004816 | Gasket |
728 | 40006251 | Gasket |
731b | 40012561 | Flow pipe (Water drain) |
731d | 40012847 | Flow pipe clip |
734 | 40007361 | Container |
734 | 40012544 | Container |
738 | 40004817 | Gasket |
745 | 40009144 | Kickplate assy |
755 | 40007362 | Cover |
755a | 40007363 | Fan insert |
756 | 23715194 | Spring |
757 | 40003315 | Gasket |
763b | 40003319 | Water rear duct gasket |
763d | 40008359 | Reservoir top cover |
764 | 40004815 | Gasket |
766 | 40006390 | Water container assy |
777 | 40004157 | Heater gasket |
797 | 40004610 | Beltightening pulley |
799 | 40001026 | Belt tighteningb spring |
806 | 40009170 | Upper hinge sleeve |
807 | 40009171 | Lowen hinge sleeve |
819 | 40009121 | Drum scowel |
822 | 40006215 | Innerdoor assy |
826 | 40004091 | Door hook |
835 | 40004307 | Drum support wheels |
840a | 40008358 | Floating |
840b | 41041353 | Microswitch |
998a | 40011305 | Eeprom File NFC |
999 | 41045070 | Electrical diagram |
1017 | 41022106 | NTC probe |
1026 | 40007831 | Front felt |