Electrolux Condenser Tumble Dryer Edc67555w is not turning on
Hi, The drying machine is not turning on, no lights on in front panel when I switch to any position. I also tried to enter in test mode, no results Is there any fuse to check? Thanks in advance for your help. Jose
Jose
I will try and help with your Electrolux Condenser Tumble Dryer Edc67555w problem.
The first thing to check is the 13 Amp fuse on the power connector itself as they do go off on occasion. If the fuse is ok, then the PCB will be the most likely part to be faulty. I have included the exploded diagrams for this model with the corresponding parts list for your convenience and for future reference from anyone else that might benefit from this information
Please note: the reference you indicated us "EDC67555W" was manufactured from 2006 to 2012 so there is several versions of this model. Make sure you are buying parts with your specific model / version reference.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common Electrolux Condenser Tumble Dryer Edc67555w faults with links to the right repair guide
I have included a lot of videos in the links below on these tumble dryers to assist you in repairing your tumble dryer; I have also included an exploded diagram of your machine with all the parts that you need listed below that just click on the relevant and it will take you to a search result
- No heat
This is the most common fault on tumble dryers.
Vented dryers: this can be a fault with the thermostats, heater, or on some occasions, it might be the timer or the relay on the printed circuit board.
Condensor dryers: this might be any of the above but you also have a condenser plate that collects the water and then is either pumped to the collection tray or flows into a tank. Check pump unit and float switches.
Heat pump dryers: these are much more complicated they use a refrigeration prosses to heat the cloths and use the cooling side to condense the water for collection. Check compressor is running, check NTC sensors and check filters, and also that it has the right amount of refrigeration gas (normally only done by an engineer)
- Drum not turning
This will stop the dryer from drying. You may have to replace a faulty belt or in other cases, look at the motor, motor capacitor, or the jockey wheels. Again there are relays on printed circuit board types that can go faulty.
- Not starting
Whilst, not a common problem, you may have a faulty door switch, starter relay if fitted, or can be start button or PCB.
- Noisy Machine
This is usually caused by faulty bearings, jockey wheels or worn felt pads. The motor can get dust build up in the bearings, also the fan blades can distort in shape and make noise rubbing the housing.
- Water leaks.
This can be a simple as the water tank (in a condenser tumble dryer) has not been emptied, or not placed back into the housing correctly. The condenser plate can need cleaning. The pump unit might not be working. Or the ducting system can be clogged with fluff etc. See servicing tumble dryer.
- Tumble dryer reports a fault code or error code.
Error codes can be on the display or given in certain lights flashing sequences. Tumble dryer fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your owner’s manual may help you identify the problem and even suggest a fix. In other cases, you’ll need an engineer to trace the fault. Don’t be tempted to ignore a fault code, even if the dryer seems to be functioning normally. Some codes are ‘early warning signs’ and fixing the machine at an early stage could save you time and money in the long run.Contact us with the full model number and detailed description
-
How to replace a belt on a condenser tumble dryer Zanussi, Electrolux & Aeg
-
Replace vented tumble dryer belt Aeg, Electrolux & Zanussi Etc
-
Condenser tumble dryer not heating up Aeg, Electrolux & Zanussi Etc
-
Printed Circuit Board Repairs for Tumble dryers AEG, Electrolux, Zanussi Etc
-
E21, E22 Error Code, Tumble Dryer Pump Fault AEG, Electrolux, Zanussi Etc
-
E61, E62, E63, E64, E65, E66, E67 Tumble dryer Error Fault Code Electrolux, AEG, Zanussi
-
E51, E52, E53 & E54 Tumble dryer error code Electrolux, AEG & Zanussi
-
Tumble Dryer fault code errors Aeg, Electrolux, Zanussi Etc
Match your part for Electrolux Condenser Tumble Dryer Edc67555w and use reference number in list below and click on the link to your part
Reference | Part Number | Description |
---|---|---|
110 | 1123441006 | HOSE,L=455 |
110A | 1258633203 | HOSE,PUMP,TANK,1130MM |
110B | 1258673100 | HOSE,CONTAINER,PUMP,L=585 NE |
127 | 1251101059 | PIPE UNION,TANK,ALTA 6/7 KG |
130 | 1251053003 | GASKET,STAND,CHANNEL DRAINAGE, |
130A | 1251067003 | GASKET,INTERFERENCE CAPACITOR, |
130B | 1254489006 | SEALING,REAR PANEL,NX4C |
137 | 1257382000 | FLOAT |
146 | 1251063168 | CONDENSOR ASSEMBLY |
303 | 3705318156 | BASEMENT,PLINTH |
303A | 1123344002 | COVERPLATE,BOTTOM |
309 | 1251054100 | COVER,SCROLL,FRONT,EDR 1N/2 |
309A | 1254505108 | COVER,SCROLL COVER,BACK |
309B | 1251069025 | BEZEL,SUMP,T.A. |
346 | 1361036005 | TANK,WATER,CONDENSATION,7 KG R |
346A | 1251118400 | SUPPORT,TANK,KIT,7KG |
500 | 1251068001 | |
514 | 1257542017 | BUSH,TANK |
523 | 3705243008 | SUPPORT,MICROSWITCH,FLOAT |
523A | 1250384003 | SUPPORT,HOSES,BACK PANEL |
557 | 1251057046 | INSULATOR,SCROLL COVER,BACK |
999 | 1251193007 | HOSE CLAMP,DRAIN,CONDENSATION |
999 | 1251225031 | FITTINGS DRAINAGE,CONDENSATION |
Reference | Part Number | Description |
---|---|---|
004 | 1364070001 | MOTOR,CAPACITOR,KIT,230-240V,5 |
006 | 1258349214 | PUMP,CONDENSATION |
007 | 1254253154 | DOOR LOCK,EMZ NX4 |
007A | 1258513165 | MICROSWITCH,WATER |
010 | 1257887206 | HEATING ELEMENT,230V 2200W BAC |
011 | 1250020516 | RUNNING CAPACITOR,5NF DUCATI |
011A | 1256418011 | RUNNING CAPACITOR,MOTOR WITH F |
019 | 1256508019 | LAMP,DRUM,220V 10W |
019A | 50287107002 | LAMP SUPPORT,+ LAMPADA |
037 | 1364090116 | POWER CABLE,WITH,FILTER,3X1.5 |
048C | 1242940102 | TEMPERATURE PROBE,NTC |
130C | 1246644007 | GASKET,PROBE |
159 | 1123341008 | IMPELLER,COOLING |
159A | 1254349010 | FAN WHEEL,FRONT,CRIP |
251 | 1251060008 | MOTOR,BUSHING,KIT,FRONT+REAR |
260A | 1258474012 | TENSION SPRING,MOTOR |
263 | 1250125034 | CLAMPING ROLLER,ASSEMBLY |
514 | 1251061006 | BUSH,MAIN MOTOR |
514A | 50278238006 | MOTOR,BUSHING,KIT,FRONT+REAR |
523 | 1251059000 | FIXING BRACKET,MAIN MOTOR,FRON |
523A | 1251058002 | FIXING BRACKET,MAIN MOTOR,BACK |
587 | 1256678077 | NOT CONFIGURED ELECTRONIC,HIGH |
587 | 973916096773098 | CONFIGURED ELECTRONIC,ENV06,TC |
999 | 1123555003 | FELT DISC,AXLE,MOTOR |
999 | 1360196008 | HARNESS,COMPLETE |
999 | 50224329008 | NUT |
999 | 50681033002 | DISC |
Reference | Part Number | Description |
---|---|---|
130 | 1368089106 | GASKET,FRONT,LARGE OPENING,DRU |
130B | 1257950004 | SEALING,BACK,DRUM |
130C | 1258379021 | SEAL,BEARING |
130F | 1258478005 | GASKET,LAMP COVER |
250 | 1360080004 | ASSEMBLY,DRUM,III |
253 | 1258288107 | BELT,L=1975 |
255A | 1250134119 | BEARING FLANGE |
260 | 1258741022 | SPRING,BRUSH |
262 | 1256522002 | DRUM PADDLE,ENV06 |
335 | 1364059004 | ASSEMBLY,ROLL,CHANNEL DRAINAGE |
514 | 1258740032 | BUSH,BOLT,BASKET |
514A | 1254250010 | BUSH,SUPPORT,ROLLER |
520A | 1250232053 | AXLE COMPLETE |
521 | 1258462033 | GLASS,LAMP,DRUM |
523A | 1254242504 | FELT FILTER,AIR INTAKE,BOTTOM |
531 | 1240222016 | SCREW,MOTOR |
550 | 1258739034 | GUARD,BOLT,BASKET |
584 | 1251155022 | BRUSH,NX4C ELETTTRONICO |
584A | 3792691002 | CARBON,EARTH |
999 | 1051185005 | DISC,13X18 |
999 | 1250141015 | RIVET,4.8X6 |
Reference | Part Number | Description |
---|---|---|
116 | 1251079032 | BACK PANEL,COMPLETE,GASKET,TDC |
116 | 1257413003 | BACK PANEL,COMPLETE,GASKET,TDC |
130 | 1257473007 | SEALING,FLAP,NX4 COND. |
130A | 50277852005 | KIT,BACK PANEL SEAL,NX4C |
135 | 1254360207 | CHANNEL DRAINAGE,AIR,FRONT,NX4 |
303 | 1256632025 | PLINTH,WHITE,ENV06 CRM |
308 | 1123347005 | HINGE,BASE,FLAP DOOR |
310 | 1256633023 | SUPPORT,DOOR,OUTER |
310B | 1123346114 | SUPPORT,INNER DOOR |
310C | 1123314104 | PUSH BUTTON,CPL. |
310D | 1123315119 | PUSH BUTTON,CPL. |
310E | 1123316018 | PUSH BUTTON,CPL. |
313 | 1256638022 | TABLE TOP,CRM B-CLASS |
324 | 1364000602 | FRONT PANEL,WHITE |
325 | 1251093223 | CATCH,FLAP,NX4 AEG |
325A | 1364016004 | SPRING,SAFETY,PORTHOLE |
326 | 1364006203 | SIDE PANEL,CABINET,WHITE |
330 | 8996470604712 | FOOT *NLA* |
334 | 1361031204 | ASSEMBLY,REAR PANEL,UT06 IRCA |
344 | 1251111009 | SPRING LATCH,FIXING,SIDE PANEL |
521 | 1254262007 | HOLE COVER,FRONT PANEL,NEX4 |
523 | 1251075055 | CROSSBAR,STIFFENING,UPPER |
523B | 1254160011 | BRACKET,HARNESS,NEX/4 TDC |
550B | 1254503038 | COVER,REAR PANEL CHANNEL,NX4 8 |
555 | 1254261009 | DECOR PLATE,HINGE,NEX4 |
563 | 1123311001 | HINGE PIN |
999 | 1254502014 | INSULATING MAT,REAR PANEL CHAN |
999 | 1254504119 | SHOCK ABSORPTION MAT,SIDE PANE |
999 | 1369142706 | USER MANUAL,SV |
Reference | Part Number | Description |
---|---|---|
500 | 1326756101 | KNOB,PROGRAMMES |
510 | 1368034003 | CONTROL PANEL,SILKSCREENED |
525 | 1325085049 | PUSH BUTTON,START,PAUSE |
525A | 1325086005 | PUSH BUTTON,FUNCTION,TC2/3/4/5 |
525A | 1325086203 | PUSH BUTTON,FUNCTION,TC4 |
525C | 1325091112 | BUTTON SUPPORT,TC4-5-6 |
536 | 1256588003 | |
563 | 1257385003 | SHAFT,SELECTOR |
Reference | Part Number | Description |
---|---|---|
120 | 1254246042 | FELT FILTER,DOOR,NX4 |
130 | 1251085021 | SEALING,DOOR,NX4C |
308 | 1254454018 | DOOR HINGE |
308A | 1257523009 | STIFFENING,DOOR HINGE,PLASTIC, |
312 | 1254245408 | LOCKING CAP,DOOR,INTERNAL |
323 | 1251084040 | INNER FRAME,DOOR |
323A | 1251083000 | A-FRAME,OUTER DOOR,NEX4 COND |
325 | 1254263047 | DOOR CATCH,NX4 |
555B | 1254252016 | COVER |
563 | 1254248006 | PIVOT,DOOR HINGE,NEX4 |