Hotpoint Condenser Tumble Dryer FTCF87BGGUK Not heating

Have installed new heating elements complete with stats. Have checked relays on control module, (all OK).Have checked float switch and pump,(all OK).Could it be humidity strip although looks good? Anything else that could hold off the heaters? At wits end so any help would be greatly appreciated.Thank You Ken

Kenneth Walker

I will try and help with Hotpoint Condenser Tumble Dryer FTCF87BGGUK problem

Good morning if you have checked all the thermostats on the heater and also so the relays on the module then it could possibly be the forward thermostat you will see this part in the diagram below 335 C00291937 THERMISTOR FRONT It is quite difficult to get at, you will have to remove the front panel, I have put a full exploded diagram of your machine below with all the parts that you need listed below that and if you check out our video section there are lots of videos to help you repair your tumble dryer

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page