Indesit IDCE8450BS Condenser Tumble Dryer keeps stopping after a few seconds

The tumble dryer runs for a couple of minutes and then stops and it seems to reset I am not too sure what the problem is I was wondering if you could point me in some sort of Direction

John Edwarsds

I will try and help with your Indesit IDCE8450BS Condenser Tumble Dryer problem

From the description that you give the only thing I could think of is that the tumble dryer is resetting the program, is if you had a possible heating error, I would suggest that you test the heating element remember there are two sides to the element a high and a low both of these are separate coils, I would also test the thermostats on the top of the heater and also the floor with them. It might also be worth looking at the pump area. 

I have included a lot of videos in the links below on these tumble dryers to assist you in repairing your tumble dryer; I have also included an exploded diagram of your machine with all the parts that you need listed below that just click on the relevant and it will take you to a search result

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page