My Hoover VHV680C-80 tumble dryer is not heating, element and temp. sensor tested and ok. what can it be?
My Hoover VHV680C-80 tumble dryer is not heating. I've tested the temperature sensor and the heating element and both seemĀ fine. After viewing your videos I'm suspecting the problem can be the relay on the printed circuit board.I have attached 3 pics. One of the whole board. One of the relay for info,and one with my thumb in to show there are 5 pins.Relay info. Omron G5LA-1-HA, 12vdc, 10a 277ac, 10a 250 ac. can you help me identify the right relay for my dryer pcb
Daniel
Ā
Ā
Hi Joseph
Double check the heating element, and also check again the front stat if the pcb is not getting the right reading it will not heat up. when you have checked that the wiring is good and ntc and heater then it might be a fault with the pcb
Ā
-
Tumble dryer not heating Hoover Candy diagnosing fault and repair
-
Hoover Candy Tumble dryer all lights flashing error fault code
-
Hoover Candy Tumble dryer drum not turning and belt ok faulty capacitor
-
How to service a Hoover Candy condenser tumble dryers
-
How to replace a tumble dryer belt Hoover or Candy
-
Hoover Candy tumble dryer empty water Indicator flashing, runs for a few seconds then stops