Zanussi ZWH6140P Washing Machine is not doing anything
Hi Paul!, my Zanussi ZWH6140P washing machine is not doing anything, it will not start! Please help!
Fred
Hi Fred!
To try and help with this problem on your Zanussi washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about these Zanussi´s. Please have a look at the relevant video to your problem, and if you need more help, feel free to come to us on our live appliance chat during working hours.
Common questions people ask about on Zanussi ZWH6140P model of washing machine.
Zanussi washing machine Won´t Drain, Will not drain, doesn´t drain, does not empty – these are all pump problems, see video on this.
Zanussi washing machine Will not start, won’t start, Will not open – this is usually due to the machine still having water in or a door interlock fault,(sometimes this might be a printed circuit board fault) see video on this.
Zanussi washing machine Will not spin, Wont spin, will not spin, doesn´t spin, fills up but the drum is not turning, won't agitate or spin, drum doesn't move!- these faults can either be motor related, pump related, or there may be a problem with the printed circuit board
Zanussi washing machine Does not take conditioner, is not taking in any water.- these are all water valve related, see videos on this.
-
How a washing machine door lock or interlock works
-
Washing machine door locked: how to repair, replace and fit a new interlock.
-
How to open a washing machine door that is stuck shut.
-
How to replace a Zanussi washing machine door seal.
-
Zanussi Washing machine won’t empty. How to replace Zanussi Washing machine pump
-
How to replace a washing machine drive belt.
-
How to Check to see if your Washing machine bearings are worn.
-
How a NTC Sensor works on a washing machine
-
Washing Machine Not Spinning
-
Washing machine will not fill with water.
-
How to replace a washing machine water valve on a Aeg.
-
How to change washing machine water valve for Hotpoint, Indesit, Proline, LG, Whirlpool, Zanussi
-
Washing machine pressure switch, how to fit, replace and Diagnose the fault related to it
-
How to test a washing machine motor
-
How to replace Washing Machine Selni motor carbon brushes
-
How to replace washing machine motor carbon brushes in a Indesco & welling motors.
-
How to replace washing machine motor carbon brushes C.E.SET Motors
Zanussi zwg6120k
Machine makes whining noise on spin cycle
My washing machine won’t spin
Machine won’t stop draining any ideas… .??..
My zanussi model ZWH6140p doesn’t take the detergent and when the drum is filled with water the start/stop button will start blinking red contineously and nothing happens again. However settings to spin, drain works ok. It was bought new but have been kept since. We just wanted to use and detected this problem. Please what should be done. I have experience in fixing electrical appliances and using multi meter so please guide me through.
turn washer on little water noise goes straight to end
Hi, I have a Zanussi 6160P which has been barely used as have been in storage for many years. It appears as new probably only be used less than 100 times & a shame to throw. There are no lights on the control panel, I have used it for a year & several times this has happened but leaving for awhile has subsequently worked so thought it was a dry joint somewhere. Have change/checked the power source, just changed the door lock & computer card as thought a dry joint my be the issue, still no joy, have checked connections to drives etc & all seem fine. If there are no lights on the panel (assuming the new door lock & computer card are ok) could it be the panel or is there another sensor that can stop any lights ? Many thanks Alan