Samsung Washing Machine 4E and E1 Fault Not filling in Allocated Time This tutorial will show you how to identify a filling fault on Samsung washing machines the error code are 4E and E1 on early models. 

 When looking at the dial on a Beko washing machine treat it as a clock 1 to 12 as in picture. On some models you may have more programs but for the basic access into the diagnostic mode is the same the same Start by turning the washing machine of with door shut.Now turn the

 To order your carbon brushes for your washing machine, you will need the full model number of the ID Plate, which you can normally find on the inside of the door frame or in the rear of the machine. Sometimes you will need the 12 digit number, which is usually prefixed with 12NC in front of

 This video will show you how to enter your Whirlpool Washing Machine into test mode and diagnose the fault codes on AWO/D & AWD Series and general Whirlpool washing machines that may not relate to models sold outside Europe, especially models sold in the USA.We are working on a Whirlpool, but this video is also

 If your washing machine is leaking from the front of the door, or the door seal is torn, warped or damaged, or mold has built up at the bottom of the seal and it’s beyond cleaning, it´s time to replace it for a new one.This video will show you in detail how to replace the

       If your washing machine is constantly filling or filling when switched off then this is the right tutorial for you.There are basically a few reasons why this can happen and I will explain them all and how to rectify them. We have included some videos to help you understand the fill system. 

 Important notice on Beko WM6143B, WM6143S, WM6143WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum

      Important notice on Beko WM5100S WM5100WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the

How to find your fault on your washing machine.This short guide is designed to outline the most common problems on a washing machine, although many people that read this tutorial are looking for a quick way to find out how to repair a washing machine there are not really any shortcuts. What this guide is

 To order your door seal you will need your full model number. (This is normally around the washing machine door frame on a sticker)