Hello, I need to replace door seal due to damage from bra wire, but unable to find one for the above model. Please advise. my model number is Zanussi ZWF81441W and Serial number: 54100962 but the PRODUCT NUMBER (PNC) 91491231600 is here

Hi. Whatever cycle I put the washing machine on, the drum won’t turn. It started last week and then done one load of washing and then went back to not turning again and hasn’t since, everything else seems fine on it.
Thanks for your time, callum

Hello Paul, I changed the door seal on this last night using your excellent tutorial video, brilliant many thanks! but now it won’t start the wash cycle, the lights light up as if going to start but it doesn’t start. The water is on and connected, I’ve tried resetting it holding the button etc., but nothing, just wondered if you know of something that I’m missing, could it be the door lock or something that i’ve not put back correctly? Any Help would be greatly appreciated!
Steven

drum wont turn or spin, did a diagnostic check and it comes up with error code E11

I watched a great video you did. And the motor looked same.I need t know what the tool you used for the two awkward screws at the back of motor. I have been confident of everything else but please HELP a 61 yrs old mum to fix daughters machine. Thanks kind Regards Maz

I am trying to get the machine in diagnostic mode so I can troubleshoot the problem, I do not know how to get into this mode for this machine. Could you help me with this or email me the tech sheet. Thanks

Half way through the wash the drum fails to rotate right and left and the error code 3E pops up, is this a symptom of the Motor failing? This fault is intermittent, it worked for a week just fine then stops spinning with the error code 3E. A couple of days later it starts working fine again.

My bush washing machine has stopped functioning & I have tried all the old tricks ie. Turning power switch off & on again & checking trip switch. Nothing

F13 comes up when I try to enter the test mode

Display board is fine and can select desired wash settings. The padlock light remains on (although door is firmly sealed shut) and no longer goes off (with a click) so program can begin. First few times would eventually begin with a few bangs to door handle area but now does not work.