Bosch washing machine wae24467gb/05 exxcel 7 fault code 63
Machine stopped mid cycle reported f21 then f 63 then display went blank I have replaced carbon brushes but am still getting f63 can you advise please .sincerely Stephen Hick
Stephen Hick
I will try and help with this problem Bosch washing machine wae24467gb/05
the first thing I would do is try doing a reset on the system I have put the instructions for this here.
F63 is control board error and you will have to replace the control board this is not cheap it might be cheaper to get a used machine and swap out the facial panel with the pcb and all the electrics you can find machines on ebay with knackered bearings as cheap as £20.
However, before replacing you can try to reset the control:
Turn the knob to off.
Close the door.
Turn the knob to 6 o'clock position.
Wait 2 seconds.
The start/pause should begin flashing.
Press and hold the spin button.
Turn the knob to 7 o'clock position.
Wait 2 seconds.
Release the button.
Turn the knob to off.
If this won't clear the error unfortunately the control board will need replacement.
-
Bosch washing machine will not spin
-
Testing a Bosch Neff Siemens washing machine motor
-
Bosch, Neff, Siemens washing machine clearing error code F04, F05, f21, F42, F43, F44
-
Washing machine Doorlock error codes E01, F08, F16, F34, E61 Bosch, Neff, Siemens
-
Washing machine door interlock without screws Bosch, Neff or Siemens
-
How to replace washing machine drum bearings on Bosch, Neff, Siemens or Balay.
-
How to replace washing machine carbon brushes Bosch Balay Neff Siemens