This tutorial is for when a washing machine will not fill with water but works OK on spin. If your machine does not fill at the start or stops in mid cycle with no water in the drum or it won’t rinse then there is normally a problem with the water intake system. If you’ve

How can you tell if a door interlock is faulty?Washing machine door locks really only get 3 major faultsThe points between live and common fail in some way.The NTC heater or bi-metal strip fail.The plastic gets to hot and distorts inside the lock causing it to jam.  Understanding how a door interlock works helps you

 Important notice on Beko WM6143B, WM6143S, WM6143WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum

If your Beko washing machine is not spinning or it is filling with water but the drum is not turning then it is a good chance that your Beko washing machine motor carbon brushes have worn out.This video will show you how to replace Beko washing machine motor carbon brushes,  This guide is also good

If your Beko washing machine is not emptying or it is filling with water but it´s not draining the water correctly then there is good chance that your Beko washing machine pump has failed or the hoses are blocked.This video will show you how to replace Beko washing machine pump, we are working on a Beko

 If your washing machine is leaking from the front of the door, or the door seal is torn, warped or damaged, or mold has built up at the bottom of the seal and it’s beyond cleaning, it´s time to replace it for a new one.This video will show you in detail how to replace the

      Important notice on Beko WM5100S WM5100WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the

  Technical Data on error codes and  faults Ariston, Hotpoint Indesit, Scholtes washing machines with these type of panels Indesit washing machine brands (WI ..), Ariston (QA .., .. AR, AV ..) hotpoint wm,wf etc and Scholtes whose facials are shown on the left. To order your washing machine parts you will need your full model

   To order your Washing machine NTC Sensors and Elements you will need your full model number. (This is normally around the washing machine door frame on a sticker) The temperature is controlled by the PCB by means of a NTC temperature sensor incorporated in the heating element when you test it the Resistance drops as the

  There are a number of reasons why your Bosch washing machine will not spin, watch the video for the 3 main faults.  This video will show you how to find the fault on your Bosch washing machine that will not spin or turn the drum during the rinse cycles.There are 3 possible causes to this.1