Hoover Condenser Tumble dryer HLXC9TE not heating very well
I have recently moved to Australia and since my household goods have arrived the tumble dryer just does not seem to be drying efficiently.
Peter from Melborne
I will try and help with your Hoover Condenser Tumble Dryer HLXC9TE problem.
I hope the weather there is a lot better than in the UK,
it is important to note as you've been transporting the machine a long distance you want to make sure there are no blockages in the ducting system, I would make sure the all the filters are clean, it is also possible that because the machine was transported a long distance it may have had a knock, this may have caused damage to the heating elements so this would be the first thing I would inspect after you have checked all the filters and ducting. the Heating units are quite fragile and this is why I'm pointing you this direction, I have put some useful videos below to assist you in any repairs that you may have, also there is an exploded diagram of your machine below. you might be able to get parts in your country but if not you can always alter them from the UK but they are going to take a while to get to Australia.
i have also put an exploded diagram of the wiring circuit and also a list of all the fault codes normally if you have a heating problem an error code will come up like e21
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common Hoover Condenser Tumble dryer HLXC9TE faults with links to the right repair guide
I have included a lot of videos in the links below on these tumble dryers to assist you in repairing your tumble dryer; I have also included an exploded diagram of your machine with all the parts that you need listed below that just click on the relevant and it will take you to a search result
- No heat
This is the most common fault on tumble dryers.
Vented dryers: this can be a fault with the thermostats, heater, or on some occasions, it might be the timer or the relay on the printed circuit board.
Condensor dryers: this might be any of the above but you also have a condenser plate that collects the water and then is either pumped to the collection tray or flows into a tank. Check pump unit and float switches.
Heat pump dryers: these are much more complicated they use a refrigeration prosses to heat the cloths and use the cooling side to condense the water for collection. Check compressor is running, check NTC sensors and check filters, and also that it has the right amount of refrigeration gas (normally only done by an engineer)
- Drum not turning
This will stop the dryer from drying. You may have to replace a faulty belt or in other cases, look at the motor, motor capacitor, or the jockey wheels. Again there are relays on printed circuit board types that can go faulty.
- Not starting
Whilst, not a common problem, you may have a faulty door switch, starter relay if fitted, or can be start button or PCB.
- Noisy Machine
This is usually caused by faulty bearings, jockey wheels or worn felt pads. The motor can get dust build up in the bearings, also the fan blades can distort in shape and make noise rubbing the housing.
- Water leaks.
This can be a simple as the water tank (in a condenser tumble dryer) has not been emptied, or not placed back into the housing correctly. The condenser plate can need cleaning. The pump unit might not be working. Or the ducting system can be clogged with fluff etc. See servicing tumble dryer.
- Tumble dryer reports a fault code or error code.
Error codes can be on the display or given in certain lights flashing sequences. Tumble dryer fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your owner’s manual may help you identify the problem and even suggest a fix. In other cases, you’ll need an engineer to trace the fault. Don’t be tempted to ignore a fault code, even if the dryer seems to be functioning normally. Some codes are ‘early warning signs’ and fixing the machine at an early stage could save you time and money in the long run.Contact us with the full model number and detailed description
Hoover Condenser Tumble dryer HLXC9TE Fault codes and errors E03, E05, E07, E08, E10, E12, E13, E14, E15, E19, E21, E22.
-
Noisey Tumble dryers, Rear drum bearing on , Candy, Hoover, Iberna, Kelvinator, tumble dryers
-
Tumble dryer not heating Hoover Candy diagnosing fault and repair
-
How to replace a tumble dryer belt Hoover or Candy
-
Hoover Candy Tumble dryer drum not turning and belt ok faulty capacitor
-
Hoover Candy Tumble dryer all lights flashing error fault code
-
How to service a Hoover Candy condenser tumble dryers
-
Hoover Candy tumble dryer empty water Indicator flashing, runs for a few seconds then stops
full list of spare parts for Hoover Condenser Tumble Dryer HLXC9TE model below
Reference | Part Number | Description |
---|---|---|
10 | 43012818 | Timer/select. knob |
31b | 40015823 | Control panel with Sensor |
48 | 40010677 | R/H side frame |
48a | 40010678 | L/H side frame |
49 | 40004597 | Top rear frame |
49g | 41041380 | Trade mark plate |
51 | 40004601 | Work top |
60 | 40009040 | Hinge |
63 | 40006231 | Door glass |
67 | 40011086 | Door with trim |
77 | 40012171 | Rear panel |
79 | 40002885 | Foot |
82 | 40009428 | Door panel |
88 | 40008589 | Front panel |
93 | 40011546 | MAIN DOOR HOOVER W 2018/T |
103 | 40013534 | Drip Cover |
131a | 92470020 | Hose clip |
135 | 40004935 | Water valve |
136 | 40004933 | Water container valve |
152a | 40013805 | Light guide support |
156 | 41039164 | Capacitor 7 MF |
157 | 41046501 | Harness |
157 | 40017023 | Harness |
161 | 40012912 | Pump |
164 | 91200489 | Anti jamming filter radio |
171 | 40008460 | Main motor |
202 | 40011928 | Drum |
205 | 40012471 | Drum shaft assy |
218 | 03210179 | Bearing |
225a | 40009928 | Gasket |
229 | 24721202 | Circlip |
230 | 40004306 | Bearing clamp |
231a | 40007401 | Pipes holder |
271 | 40005393 | Door gasket |
280 | 40009775 | Hose clip |
292 | 40012264 | Drive belt |
318d | 40014816 | Electronic BLE pcb - Not programmed |
318e | 49121033 | Electronic control PCB - BLE -Programmed |
440a | 46004464 | Scroll seal |
442 | 40009278 | Fan |
442a | 40009379 | Rear fan |
443 | 41037151 | Thermostat |
444 | 40012558 | Duct fun |
445 | 40012556 | Nozzle Cond. Recovery |
445a | 40012557 | Nozzle Cond. Recovery Seal |
448 | 40013366 | Heater |
461h | 41014595 | NTC sensor seal |
464 | 03860580 | Water offset |
491c | 41034522 | Mains cable x UK |
494d | 40013745 | Light Guide - Digital Display |
520 | 40006928 | Door coupler |
607 | 40006220 | Pin for hinge |
631 | 40006586 | Stopper |
643a | 41041381 | Handle insert |
647 | 40015390 | Water condenser |
654 | 40003802 | Thermostat gasket |
657 | 41018444 | Bracket |
671 | 03610428 | Washer |
690 | 40011933 | Rear sealing felt |
690c | 40010756 | Seal motor/water duct |
691 | 40011976 | Rear cover seal |
696 | 40011929 | Heater support |
697 | 40011930 | Heater support disk |
706 | 40012494 | Front ring assembly |
706a | 40011352 | Duct side filter |
707 | 40005584 | Filter for carter |
727 | 40004816 | Gasket |
728 | 40006251 | Gasket |
731b | 40012561 | Flow pipe (Water drain) |
731c | 40009075 | Water Delivery Pipe |
731d | 40012847 | Flow pipe clip |
734 | 40012545 | Container |
738 | 40004817 | Gasket |
745 | 40009144 | Kickplate assy |
748 | 03320032 | Tube |
755 | 40012540 | Cover |
755a | 40007363 | Fan insert |
757 | 40003315 | Gasket |
763b | 40003319 | Water rear duct gasket |
763d | 40008360 | Reservoir top cover |
764 | 40004815 | Gasket |
766 | 40009648 | Water container assy |
766b | 40004928 | Water container front cover |
777 | 40011965 | Heater gasket |
797 | 40004610 | Beltightening pulley |
799 | 40001026 | Belt tighteningb spring |
804 | 40009167 | Hinge fixing upper bracke |
806 | 40009170 | Upper hinge sleeve |
807 | 40009171 | Lowen hinge sleeve |
819 | 40011934 | Drum scowel |
822 | 40010003 | Innerdoor assy |
826 | 40004091 | Door hook |
835 | 40004307 | Drum support wheels |
840 | 40010626 | Float assy |
840a | 40008358 | Floating |
840b | 41041353 | Microswitch |
998b | 40015827 | Eeprom File BLE |
999 | 41045051 | Electrical diagram |
1004 | 40005153 | Flow restrictor |
1017 | 41022106 | NTC probe |
1026 | 40011691 | Front felt |