Not filling. Water going in and coming straight out

IS THERE ONLINE VIDEO FOR ZANUSSI WASHING MACHINES

I have replaced the ​haul sensor on my washing machine after watching one of the videos​, but the motor will still not turn. the drum is very stiff and when the machine fills with water it tries to turn but stops, after having a conversation with you on the phone, I have had great trouble removing the element but after finding out that there was an additional nut holding the earth wire on the element. I eventually managed to get it out and lo and behold found this sock wrapped around it

When on a wash cycle, excessive noise washing its Noisy from pump area when on wash cycle, can you help

Hi, I did a load of towels in my beko machine and put too much soap. I now have an e12 error. Can you help me

Good afternoon
be4 start wash when i close the door the sign key appear on screen board and i can’t open again when i press start button and washing machine start pumping out even without water and drum moving slowly NO water coming and timer work normally and when switch off the door not open.
Thanks

Brushes for C.E.SET Motor MCC 61/64-148/WHE14 461970428301

Program selected pressed start button, stays on for 30 seconds, start flashing, program does not start. Tested doorlock, Got ohm reading. Should I still re[place the doorlock. One of the last times the machine worked I was able to open the door while program was working. Should I first replace the doorlock

Hi is it worth trying to repair a torn door seal on our washing machine… tear is about 3cm long and 0.3cm high on leading edge at bottom

It has power & water to it, selecting any program it won’t start. if you press the start button the door locks but I get no display or lights. if you press the “senitive” button ( plus one other) a number of lights plus the green door lignt come on while you hold the button in. This machine has 2 PCB’s, one control & the other user interface. suspect one is faulty but don’t know which ? can you help please