Brushes for C.E.SET Motor MCC 61/64-148/WHE14 461970428301

Program selected pressed start button, stays on for 30 seconds, start flashing, program does not start. Tested doorlock, Got ohm reading. Should I still re[place the doorlock. One of the last times the machine worked I was able to open the door while program was working. Should I first replace the doorlock

Hi is it worth trying to repair a torn door seal on our washing machine… tear is about 3cm long and 0.3cm high on leading edge at bottom

It has power & water to it, selecting any program it won’t start. if you press the start button the door locks but I get no display or lights. if you press the “senitive” button ( plus one other) a number of lights plus the green door lignt come on while you hold the button in. This machine has 2 PCB’s, one control & the other user interface. suspect one is faulty but don’t know which ? can you help please

only got 140 volts to motor hence it won’t turn. where would you start looking for the fault.
Kind regards WFR

Washer/dryer display shows E13 when the program selector is turned from off to any program. What is at fault or can it be reset.
Thank you
Richard.

Not sucking water inside the machine

When I start the washing, The door won’t lock & not taking the water into the machine,

My Samsung top load washing machine is showing “door” error even though the door closes properly.

Good Evening
i would like to know how to diagnose, if the problem is the PC Board or the drive motor?