Hoover Candy Tumble dryer all lights flashing error fault code

by / Friday, 28 October 2016 / Published in Tumble Dryers

Hoover Candy Tumble dryer all lights flashing error fault code

This video will explain how the error codes may be displayed on your Hoover or Candy tumble dryer and some Maytag, Helkama, Kelvinator, Otsein, Teka, Terzismo, Zerowatt models. We will explain what they might mean, there is a list of videos below that will help you with each individual repair showing you how to diagnose the faults how to replace the faulty parts . Always remember you can submit a comment or question below and we will try to point you in the right direction.

These fault codes for tumble dryers including both normally vented and condenser tumble dryers and may be used on other Candy made tumble dryer models.

These error codes do not relate to all tumble dryers as some have different circuit boards fitted. If you are unsure please ask

Before you start any investigation of the fault or even remove the lid of your tumble dryer please watch our videos and fully understand them in full and pay particular attention to the safety and information notices

Please remember to support our site by buying spare parts from our store and, if you decide we really heled you can always share the site with friends.

There are loads of video below to help you repair your tumble dryer condenser or vented and they will help you with all these makes Hoover or Candy tumble dryer and some Maytag, Helkama, Kelvinator, Otsein, Teka, Terzismo, Zerowatt models.




91 Responses to “Hoover Candy Tumble dryer all lights flashing error fault code”

  1. alan robins says : Reply

    Hi, my hoover tumble dryer displays E 08 please help

  2. Dan Adams says : Reply

    CANDY Grand gov580c, all lights flashing tumble dryer works turns heats etc but cuts out shortly after starting.

  3. Tony Owens says : Reply

    Hello, Candy tumble drier is showing an E15 fault code. Could you please advise on spares/repair. Model number is GVCD91CB-80

  4. Robert says : Reply

    Hi, is it possible to advise on the following. Our candy tumble dryer is beeping and shows E15. Can you diagnos the fault and advise what steps we need to take. Mod: GVC D91W8-80
    Regards
    Robert

  5. David Ritchie says : Reply

    how to fix my hoover tumble dryer Mod VTV570NB -80 all lights flashing and beeping

  6. Andy says : Reply

    I have a Hoover VHC-681B, and all the lights flash on it when attempting to run it, (it runs for a couple of minutes).

    Looking at the diagnosing video, I have found that the thermal cut off thermostat on top of the heater at the back, had no continuity, so I presume it has ‘tripped’.
    Can I just replace the thermal cut off thermostat?, or will I need to replace the circular thermostat beside it also?
    Or would it even require a whole new heater?

    Regards,
    Andy

  7. Andrew says : Reply

    My candy gcc591nb
    The lights are all flashing drum is still spinning but there is an error how do I find what part I need ??
    Thanks Andrew

  8. Matthew davies says : Reply

    Hello I have a hoover vtv591nc , it comes on normally then all the lights start bleeping , I have opened it and there is no heat either ? Just wondered what part I would need ? I have cleaned the filter so know it’s not that , thanks if you can help me in this matt davies

  9. James Clarke says : Reply

    I have a candy gcc591nb sensor condenser dryer and all the lights come on a few seconds after starting it! Any ideas what it could be?

  10. Albert Walsh says : Reply

    Hi I have a Hoover tumble dryer ,it’s showing a fault code E15 . When you select a program you can hear a faint buzzing sound the filters out after about 5 seconds this is before you press the start button .it will run for anything up to approximately 15 minutes, is it normal for there to be a slight delay for the motor to turn after you press the start bottom , I’m wondering if a week capacitor could through a E15 code . It’s like it runs under the program wants to reverse the drum and the motor can’t start ,any help will be really appreciative
    Regards
    Albert

  11. sophie says : Reply

    I have the hoover condenser dryer its not got the led screen so I can’t see an error code , the belt in turning inside my dryer but it won’t heat up, also the 6 lights on the front a flashing red and beeping after about 10 minutes of the dryer running.
    please could somebody help thanks

  12. Julie says : Reply

    Hi.

    I have a HOOVER mod VTC5911NB.80 dryer . Lights flashing no heat, all filters cleaned .. please help

    Regards

  13. Jenny austin says : Reply

    All lights flashing on my hoover tumble dryer how to I find out what fault it is?

  14. wrae winter says : Reply

    my hoover vtv57NCB-80 tumble dryer all lights flashing and beeping at me within a few minutes of any cycle, no warmth. please help and maybe possibly a list of tools i might need please.

  15. Chris says : Reply

    Hi,
    My Candy condenser tumble dryer keeps flashing (all lights), shortly after starting.
    The model- CS C8LF-80
    N.- 3110090417470253

    Please advise me further.
    Thanks

  16. sharon lote says : Reply

    hi i have a hoover tumble dryer and its displaying error loc how do i fix it please thanks you

  17. louise Ayrey says : Reply

    Hi my candy GCC580NBB LIGHTS are flashing

  18. Andrew Fraser says : Reply

    CANDY Grand Comfort Model GCC591NB-80. All lights flashing drum turning but no heat getting produced.

  19. Anna says : Reply

    Candy tumble dryer – fault E13 and E14

  20. Josaphine says : Reply

    Hi hey led display panel not working only the drying time appears nothing else Hoover vtc condenser dryer thanks.

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP