Hoover Candy Tumble dryer all lights flashing error fault code

by / Friday, 28 October 2016 / Published in Tumble Dryers

Hoover Candy Tumble dryer all lights flashing error fault code

This video will explain how the error codes may be displayed on your Hoover or Candy tumble dryer and some Maytag, Helkama, Kelvinator, Otsein, Teka, Terzismo, Zerowatt models. We will explain what they might mean, there is a list of videos below that will help you with each individual repair showing you how to diagnose the faults how to replace the faulty parts . Always remember you can submit a comment or question below and we will try to point you in the right direction.

These fault codes for tumble dryers including both normally vented and condenser tumble dryers and may be used on other Candy made tumble dryer models.

These error codes do not relate to all tumble dryers as some have different circuit boards fitted. If you are unsure please ask

Before you start any investigation of the fault or even remove the lid of your tumble dryer please watch our videos and fully understand them in full and pay particular attention to the safety and information notices

Please remember to support our site by buying spare parts from our store and, if you decide we really heled you can always share the site with friends.

There are loads of video below to help you repair your tumble dryer condenser or vented and they will help you with all these makes Hoover or Candy tumble dryer and some Maytag, Helkama, Kelvinator, Otsein, Teka, Terzismo, Zerowatt models.




94 Responses to “Hoover Candy Tumble dryer all lights flashing error fault code”

  1. Isaac says : Reply

    Hi guys,

    I followed your video for the Hoover VTV581nc -80 and ended up replacing the heater and the main board but still have an error. When you start the dryer on any program it runs for a few seconds and the starts beeping with flashing lights. What other checks could identify the fault?

    Thanks

    Isaac

  2. Stephen says : Reply

    CANDY DRYER MODELS NO GVSC9DCGB-80 FLASHING E22 CAN U HELP ME AND PART WIL I NEED

  3. David Holdsworth says : Reply

    got e15 error on my candy grand ovita tumble dryer.can anyone tell me what the error means and what part I need.also where to get part from
    kind regards Dave
    model number GVC D101BC-80
    serial number 3110079316470252

  4. NEIL RUFFELL says : Reply

    Hi
    I have a Hoover model no. DX C9DG-80 and it is showing error code E22. It will run for a sort time but appears to have no heat.
    Any ideas please? It’s only 14 months old and of course it has a 10year parts warrenty but Hoover want £180 to come out!
    Regards,
    Neil

  5. Danny wood says : Reply

    Hi, I own a Hoover infinity vision Tech 7kg sensor dryer. The start button light flashes but when i push it nothing happens. I held the start button down for a few seconds and all the lights flashed. I have cleaned all filters regularly and emptied water tank.
    I gave it a whack on the side and it started but stopped again after a few mins. It heats up fine but just does not want to run.
    Any help would be great.

    kind regards
    D.wood

  6. Iain MacCorquodale says : Reply

    Hi there. I have a Candy Hoover Model: GVS C10DCGB-80 and it’s showing Error code E22. Any advice would be greatly appreciated

  7. Terry Greenhill says : Reply

    Hi , we have a Hoover Vision tumble dryer , Mod VHV 68C -80 , N 3110053314410226 . The drum turns when switched on , but doesn’t heat the air. Then after a few minutes all of the lights on the front flash.A couple of days ago I had to replace the fuse in the plug. I have followed your very good video on how to find the fault. I have continuity on both thermostats but my heating unit only has 3 wires , red,black and yellow. I only get continuity between the black and yellow wires . Can you tell me if this means the heater unit is serviceable or not so that I can continue looking further into the fault.
    Many thanks…. Terry . ( Leics. )

  8. Mick says : Reply

    Hi my hover infinity has all the lights flashing and beeping. I have cleaned all the filters as I normally do but the problem is still happening. Looks like it’s not heating up. Any idea what part is needed please

  9. Samantha Bennett says : Reply

    My Smart Touch Candy Condenser dryer is showing E21 please help!

  10. David Townsend says : Reply

    Error code E22 , Hoover Dynamic Next 9KG

  11. Aoife brien says : Reply

    Hi my condensed hoover tumble dryer is displaying error code E22. Can you please tell me what this is. Lights also flashing

  12. Terri says : Reply

    I can’t get the loc code off my candy grand vita tumble dryer

  13. Lynne Mosedale says : Reply

    Hi, I have a candy grand comfort dryer, mod. GCV591NC-80 and the lights are flashing and also an alarm sound. Please help !!
    Many thanks Lynne

  14. Penny John says : Reply

    Hi
    I have a hoover tumble dryer which shows error 21 can you tell me what this is and what part I will need please.

  15. paul says : Reply

    hi I have all lights flashing VTv590ncb-80

    thanks
    Paul

  16. Spike Connell says : Reply

    I have a hoover condenser dryer and it is flashing code e21. Any help would be great.
    THANKS

  17. Mica says : Reply

    Hi.
    I have a Candy Grandó Vita tumble drier. It was purchased almost a year ago and the past 4 months has been flashing up with the error code E21.
    I’ve taken the back off and pressed the reset button and this resolves the issue for half a drying cycle, before the drying is even done the error code flashes up again.
    Could you recommend anything else I could do to fix this please?
    Kindest Regards.

  18. Khaled says : Reply

    Hello..
    What does mean E21 in candy dryer?

  19. Mark says : Reply

    My hoover infinity vision HO sensor condenser tumble dryer when l put it on all the lights are flashing

  20. Gummi says : Reply

    How to fix tumbel dryer Candy Hoover all lights blinking?

    Thanks

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP