Hotpoint Creda tumble dryer how to fit front felt bearing. Part 1
by Paul Charmbury
/
Tuesday, 27 August 2013
/
Published in Drum & Bearings, Repair Guides, Tumble Dryers
This video will show you how to replace a front felt bearing on a tumble dryer, we will show dismantle the tumble dryer and replace the felt seal which is also known as the felt bearing.
You will need to remove the front of the machine to gain access to the felt bearing
This video can be used on Ariston, Creda, Edesa, Export, General electric, Indesit and Hotpoint
You will also find the parts that you need around this page
Please see other Tumble Dryer videos on Ariston, Creda, Edesa, Export, General electric, Indesit and Hotpoint
-
How to replace a tumble dryer motor for when the dryer is not turning part 2
-
How to replace tumble dryer belt on Hotpoint, Indesit, Ariston, Creda & Proline
-
How to test a tumble dryer that is not heating and change a thermostat that is faulty
-
Printed Circuit Board Repairs for Tumble dryers AEG, Electrolux, Zanussi Etc
-
Condenser Tumble Dryer how to replace the pump unit.
-
How a NTC Sensor works on a Tumble Dryer
-
How to replace a Tumble Dryer fixed drum Riveted Drum shaft
-
Tumble dryer noisy Hotpoint
-
Tumble dryer is not turning? How to find the fault and replace motor capacitor
-
How to change a tumble dryer heater
Tagged under:
how to replace tumble dryer drum bearings, replace tumble dryer drum bearings, replacing tumble dryer drum bearings, tumble dryer drum bearings
[…] […]
Hello to all. I have one problem with Whirlpool AWZ 8665 dryer. The programator switch-off (I hear in programmator some click(s)…) the heating unit after app. 10 sec and no switch-on again until dryer is switched off. Then by new start of dryer the same procedure again…
I checked NTC and is o.k., also other themperature switches and heating unit are o.k..
What can cause such dryer work? Thanks in advance for your help and suggestions!
I have a white knight tumble dryer model cl 37 code=0312 372 15191
need to replace what looks like felt seal bushes for around the drum
not looked at front seal will need help in dismantle + identifying parts
thank you John Robson
when you have a question please use our contact us page for 24 hour response https://how-to-repair.com/help/contact-us/
Appliances Engineer