Hotpoint Washing Machine WT741/2P Door lock
This washing machine was purchased in 2006. No problems until last week. At the end of cycle "door" flashed a few times. Machine now lights up but does not start. We removed door lock and are looking for a replacement part.
Tina McGilton
I will try and help with your Hotpoint Washing Machine WT741/2P problem.
The door lock for your model is C00085194 and is readily available. I have included below a list of common faults with your model range as well as all the exploded diagrams and parts list in case you need anything else and to help anyone that might be looking for this information.
Please note: there are 6 models for the reference you indicated us "WT741".
WT741/2P / WT741/2G / WT741p / WT741G / WT741/1P / WT741/1G
For the schematics and parts list below we used model WT741/2P
Make sure you are buying parts with your specific model reference.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common Hotpoint Washing Machine WT741/2P faults with links to the right repair guide
- The machine won’t fill with water
Make sure the door is properly closed, check that inlet hoses are clear and not kinked and that the water supply is connected and functioning. Water valve may be faulty See our video on water valves
- The drum doesn’t turn
There are a number of things that can cause this, including worn carbon brushes, drive belt problems, or a faulty motor or control unit PCB. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults
- The machine stops mid-cycle
This generally means that the timer, thermostat, or heater had failed. The washing machine may stop due to these faults or the water rinse valve may be faulty or the machine has not emptied the water out of the drum in an allocated period of time.
- The washing machine is noisy
A rattle, while the drum is moving, could be due to something stuck in the drum, coins and bra wires are common culprits. You may be able to remove the drum paddles to get to the offending item or remove the sump hose or heater. It’s also worth checking the drain filter to make sure that’s clear. A noisy washing machine may also indicate failed or worn bearings or drum spider. Try turning the drum by hand when the machine is empty. If you hear a rumbling noise or can feel ‘play’ in the drum, it’s likely that the bearings need replacing. You can also get drum spring or shock absorber problems.
- Water not draining from the washing machine
This usually means there’s a blockage in the drainage filter, or the pump itself has failed. The first thing you’ll want to do is empty the water so you can rescue your laundry. Pull out the drain hose, pop it into a bucket and let gravity do the work. Also, check the sump hose and waste pipe if fitted to a sink unit the problem can also be the connection.
- The washing machine won’t spin
Problems with the spin cycle are relatively common washing machine faults, if your machine knows there is water still in the drum it will not allow the drum to spin it must empty in an allocated period of time. The good news is that they’re generally relatively inexpensive and simple to fix. Balance sensors will override the cycle if the clothes are unevenly distributed and could cause the machine to vibrate. This can happen if you’ve overloaded the washer, or if you’re trying to spin just a few items. Try reloading light loads or removing a few items from heavy ones. If this fails, motor carbon brushes may need to be replaced. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults
- The door won’t open
This will usually be due to water not draining, or a faulty door lock. Drain manually as above. If that doesn’t fix the problem you may be able to remove the top of the machine and release the lock from the inside see videos.
- Clothes smell bad
If you always use low-temperature washes and biological detergents you could have a build-up of bacteria or even mold in the machine. Try running a hot empty wash once a week. You should also clean out the soap dispenser regularly, and leave the machine door open to air after you’ve removed the washing.
- The washing machine is damaging clothes
Tears in clothes indicate foreign bodies in the machine or damage to the drum.
10.The washing machine is constantly filling with water
the machine is siphoning or water valve is leaking
11.The machine reports a fault code or error code
Error codes can be on the display or given in certain lights flashing sequences. Washing machine fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your owner’s manual may help you identify the problem and even suggest a fix. In other cases, you’ll need an engineer to trace the fault. Don’t be tempted to ignore a fault code, even if the machine seems to be functioning normally. Some codes are ‘early warning signs’ and fixing the machine at an early stage could save you time and money in the long run. Contact us with the full model number and detailed description
-
How to remove a washing machine sump hose and filter to clear blockages
-
How to Remove Items from a washing machine drum like bra wire, coins, screws
-
Hotpoint Ariston aqualtis washing machine will not start how to replace door lock
-
How to Replace a Hotpoint Washing Machine Drum Paddles or lifters.
-
How to Replace Hotpoint Ariston washing Machine Door Handle
-
Washer dryer not heating up on Ariston, Creda, Hotpoint, Indesit, New world and Scholtes washing machines
-
How to replace a washing machine door seal on Hotpoint, Indesit, Ariston & Scholtes
-
How to replace your washing machine motor on Hotpoint, Creda, Etc early models only
Match your part for Hotpoint Washing Machine WT741/2P and use reference number in list below and click on the link to your part
Reference | Part Number | Description |
---|---|---|
101 | C00203585 | CONSOLE WT741P |
104 | C00112601 | DRAWER LATCH |
105 | C00203582 | DISPENSER HANDLE |
110 | C00112564 | Washing Machine Soap Dispenser Drawer |
113 | C00117136 | Washing Machine Soap Dispenser Tray |
114 | C00141202 | DISPENSER OUTLE HOSE (HL) |
116 | C00112605 | HERBIE CLIP |
117 | C00149572 | SCREW NO8 X 5/8 |
117 | C00290783 | Washing Machine Soap Dispenser |
120 | C00203583 | PROGRAMME SELECTOR |
122 | C00203572 | ON/OFF BUTTON P |
123 | C00203573 | LIGHT GUIDE ON/OFF |
124 | C00203575 | LIGHT GUIDE STATUS |
125 | C00144133 | WATER SHEILD |
126 | C00203574 | LIGHT GUIDE OPTION |
127 | C00203571 | OPTION BUTTON P |
129 | C00195794 | LENS DIGIT |
135 | C00203584 | VARIABLE BUTTONS |
140 | C00140792 | Washing Machine Display Card |
141 | C00112596 | SCREW 3.5 X 12.7 |
142 | C00192993 | HARNESS PRESSURE SWI TCH |
143 | C00203623 | HARNESS DOOR LOCK |
144 | C00192990 | HARNESS FILTER |
146 | C00193793 | HARNESS MOTOR-PUMP (HL) |
147 | C00192988 | HARNESS VALVES |
148 | C00192989 | HARNESS SERIAL LINK BLUE |
160 | C00201982 | Washing Machine Double Valve - Cold |
160 | C00112661 | Washing Machine Cold Valve |
201 | C00112567 | FRONT PANEL POLAR |
202 | C00112582 | SCREW NO8 X 1/2 |
203 | C00117326 | Washing Machine & Tumble Dryer Plinth |
210 | C00085194 | Washing Machine Door Interlock |
211 | C09900400 | SCREW PAN POZI |
213 | C00112587 | DOOR LATCH |
214 | C00095992 | LATCH PIN |
215 | C00112588 | LATCH SPRING |
216 | C00141704 | Washing Machine & Tumble Dryer Handle |
220 | C00143605 | Washing Machine Door Seal |
221 | C00112571 | DOOR SEAL RETAINER D |
221 | C00264305 | Washing Machine & Washer Dryer Door Seal Clamp |
222 | C00112572 | DOOR SEAL RETAINER |
230 | C00112193 | DOOR HINGE |
232 | C00065185 | Washing Machine Bolt |
240 | C00193819 | Washing Machine Door Glass |
241 | C00202545 | Washing Machine & Tumble Dryer Outer Door Trim |
242 | C00195805 | Washing Machine Rear Door Trim |
243 | C00039537 | Washing Machine & Tumble Dryer Screw |
301 | C00143604 | Washing Machine Drum And Tub |
305 | C00112681 | Washing Machine Drum Paddle |
310 | C00143606 | UPPER WEIGHT |
311 | C00143607 | LOWER WEIGHT |
312 | C00118502 | WEIGHT FIXING |
315 | C00112684 | THIMBLE SPACER |
320 | C00199343 | Washing Machine Drum Pulley |
322 | C00143609 | TORX SCREW M8X20 |
323 | C00143610 | Washing Machine Drive Belt |
330 | C00140797 | CABLE CLIP |
330 | C00143611 | MOTOR 1400 ACC 45 ST ATOR (HL) |
330 | C00263959 | MOTOR (HL) |
330 | C00267683 | BRUSH ASSY (QTY X1) ACC UOZ1 |
330 | C00267694 | BRUSH KIT (QTY X2) ACC UOZ112 G 55 |
330 | C00296122 | Washing Machine Motor Brush |
331 | C00094744 | MOTOR BOLT |
332 | C00112687 | FLEXIBLE MOTOR MOUNT |
334 | C00250676 | WASHER FLAT M8 |
335 | C00112689 | LOCKWASHER |
340 | C00143654 | HEATER (HL) |
350 | C00112691 | Washing Machine Drum Suspension Spring |
352 | C00271755 | Washing Machine Suspension Damper Kit |
353 | C00112694 | SCREW |
354 | C00118593 | PLASTIC EXPANSION PEG |
360 | C00143613 | SUMP HOSE |
361 | C00092172 | OKO BALL |
363 | C00112698 | HOSE CLIP |
363 | C00143615 | PRESSURE PIPE |
364 | C00119212 | SUMP HOSE OKO SEAL |
366 | C00143620 | HERBIE CLIP SUMP |
367 | C00143621 | HERBIE CLIP Q |
368 | C00112700 | CABLE TIE |
372 | C00118502 | WEIGHT FIXING |
401 | C00140801 | TOP COVER |
402 | C00149572 | SCREW NO8 X 5/8 |
408 | C00195544 | FRONT PANEL RETAINER NEW |
410 | C00261745 | CABINET |
412 | C00143628 | BACK PANEL WELDED DR . |
413 | C09900400 | SCREW PAN POZI |
414 | C00115587 | HARDWARE KEY BLACK MK 2 HARDWARE KEY |
414 | C00272306 | Smart Card Reader |
415 | C00222800 | USB - SERIAL LEAD |
416 | C00112640 | Washing Machine Foot |
417 | C00202842 | EEP EVOII BLANK EVO 2 |
417 | C00267469 | SMART CARD WT741/2 (FHP MOTOR) |
417 | C00195967 | EEPROM WT741/2P EVO11 SW 28463510050 |
417 | C00267469 | SMART CARD WT741/2 (FHP MOTOR) |
417 | C00268021 | SMARTCARD WT741/2 (CESET MOTOR) |
418 | C00254297 | Washing Machine Power Board Module |
419 | C00112735 | CAP SERIAL PORT |
420 | C00112646 | CABINET HOSE CLIP |
421 | C00112647 | RETENTION CLIP |
430 | C00195715 | TRANSIT KIT 7KG |
432 | C00112651 | TRANSIT FIXING |
440 | C00145315 | Washing Machine Drain Pump |
440 | C00271401 | DRAIN PUMP (NEW WATER COOLED) |
441 | C00143649 | DRAIN HOSE |
442 | C00112656 | HERBIE CLIP SUMP |
444 | C00203413 | HERBIE CLIP P |
450 | C00143651 | PRESSURE SWITCH (HL) |
452 | C00112660 | HOSE CLIP |
463 | C00112667 | Washing Machine and Dishwasher Fill Hose |
464 | C00143652 | ELECTROVALVE SUPPORT 1 EV NO HOSES (HL) |
470 | C00203264 | Washing Machine Mains Cable & Filter |
476 | C00112675 | HARNESS CLIP |
477 | C00112676 | BEARING KEEPER PLATE |
478 | C00112677 | BEARING - SPRING TOP |
481 | Information | THIS IS NOT FITTED TO THIS MODEL |
999 | C00203586 | BRAILLE WT741P |
999 | C00161617 | HANDBOOK 7KG UD WM |
999 | C00195578 | SERVICE MANUAL |